Monday, September 24, 2012

Radio Free Europe




We have often pointed out that, in our view (which is not original - that we have not discovered America), the crisis experienced by the country in general and the eurozone, apart from the economic, has a geopolitical dimension: behind debt crisis hardly hiding the US-German conflict. The U.S. has every reason to seek the continuation of the situation after the Second World War Reserves in Western Europe: that of the (American) protectorate.
Germany has every reason (and ability) to challenge on behalf of at least this role. Much more Germany thought it had a chance to replace the U.S. as the leader of Europe.
Up to a point the Euro-Atlantic system worked complementary. The expansion, say, NATO countries with their former Eastern bloc proceeded step by step integration of these countries into the EU Then Germany made the strategic choice of enlargement leaving for later deepening and creating mechanisms that confer the EU the nature of the global player.
In other words, the Germans, in order to build up a market in which they were privileged position ignored that without a common foreign and defense in their own shop, the EU would have remained just a shop NATO.
That the Germans realized very quickly, when Bush began his crusade in Afghanistan and Iraq. In this case the new partners in the EU - And former countries of central and eastern Europe - were more Americans than Americans not allowing Germany to submit any question of U.S. policy.
Apparently the Germans, more than anyone, know what exactly is NATO: The (American) mechanism that keeps "Germany down, Russia out and America into Europe."
Where everything written above approach the complex reality of the day, one can easily understand why the Germans now appear late supporters of Greek views on the issue of inclusion of Macedonia in the EU According to the Greek position, be remembered, it means the country's accession to Euro-Atlantic institutions (EU and NATO) without first finding a solution to the name issue.
The German sensibilities made just yesterday by the Commissioner responsible for EU enlargement Commissioner Stefan Fule as follows, in a statement on radio "Free Europe» (Radio Free Europe) based in Prague:
"I think first of all it is important to say that there is no distinction: All neighbors are important for the candidate country, the country that wishes to join the EU (Note: he means FYROM). The case in relations with Greece are obvious: there is the name issue which must be resolved.
Beyond relations with Greece, all I hear most often about relationships and the complexity of relations with Bulgaria. I hear many statements by Bulgarian representatives who reported problems in the relations between Sofia and Skopje. This should be solved by politicians of both parties. Politicians in both countries have the responsibility.
The path to EU passes through good neighborly relations, and if you want to become a good member of the Union, the only way is to simultaneously become a good neighbor. "
These late German sensitivities are even more important since verified the information published  for the secret existence of proximity talks between Athens and Skopje under direct U.S. mediation.
The goal of this effort is the American FYROM's accession to NATO with the name (Greek usage) Upper Macedonia by the end of the year.
She obviously interesting to see what direction the Euro-Atlantic dipole tilt will Antonis Samaras ...

Here we should note and follows the candidate Cypriot president said the euro zone is really useless for the country, because the euro Cypriots wait a security in an economy and safety in living epippedo them, which ultimately never Done .... the IMF also stressed hard against Cyprus in case memoranda. You believe that Russia will tolerated; Of course not ... Russia wants to protect its naval base in Syria, however if dropped Aleppo then Russia loses any ground in the Mediterranean, thus keeping the cyprius outside the euro, IMF etc provides a basis for naval and treasure ....

Another point is the huge undersea quantities of natural gas and oil in the surrounding areas ... with aircraft carrier from the U.S. and a few submarines from Russia to protect them...  and have after many years of conflict Turkey and Israel ..


The Arabic Spring as we saw took place only to some countrys... they forgot Qatar and Saudic Arabia.. and of course any other coutry that they did not wanted to change the system....


Monday, September 10, 2012

CFD Analysis of Turbo Battery Charging System fo Hybrid Cars

Please, people that are not friends with innovation may not read that, i can not answer all questions.


This project consists of two major approaches, one of this is experimental approach and another is computational approach through CFD software. IC engines lose 42%  of their energy to exhaust. So a number of methods have been established to increase the performance of the internal combustion automobile engines. Turbo battery charger is a device which converts wasted exhaust gas energy into valuable electrical energy, which is used to charge the battery of vehicles. This part of project includes Computational Fluid Dynamics Analysis of this model and to compare the practical results with software results. Depending on the inlet velocity (exhaust pressure), the rpm of turbine changes and we get different levels of energy, from which we have compared the final power output. This project includes studies variation of different parameters like total and static pressure, velocity magnitude, temperature and kinetic energy throughout the case and the turbine, under various conditions to see how they will behave.


INTRODUCTION
1.1Summary

Turbo battery charging system converts the pressure energy into electrical power. This system uses the pressure and temperature of the exhaust which is sent through a or a set of nozzles and generates high velocity gases at the exit. This high velocity gas is being utilized to drive a turbo generator (turbine coupled with dynamo) which powers the auxiliary units such as car batteries, air conditioner headlight etc. So fuel
economy is greatly saved which is the need of the hour.

Figure 1.1 Symmetric diagram of Turbo Batter Charging System


In this turbo model we have used a single stage impulse turbine. This project incorporates the simple design of axial flow impulse turbine whose results are better than radial flow .


The second part of the project is the Computational Fluid Dynamics Analysis of fabricated model. CFD is the study of fluids to see how they will behave under various conditions and shows the interaction between solid and fluid part. In our project CFD analyse the exhaust gas which strikes on the blade of the turbine and gives the energy level that we should achieved. The high inlet velocity and pressure energy results in the rotation of the turbine by which we get some power output. So we have compared the practical results with
software results.

1.2 Benefits of Turbo Battery Charging System.

Now a day’s battery is charged through crankshaft. So a part of its energy is utilized in charging. We are using exhaust gas to charge the battery which is generally not used in any other purposes and simply wasted. So a part of energy is being saved as well as the overall power output got increased. By using this device we can generate the electricity which can be used to charge the battery. And can also be used to run air conditioner and to glow the head lights.

1.3 Limitations of Turbo Battery Charging System.

This device consists of a converging nozzle because of which a small back pressure may be generated. This back pressure can be harmful for engine for engine and an engine can work improperly.


2.1 Principle

During IC engine cycles at the exhaust stroke the piston moves from BDC to TDC that movement forces the gases through exhaust manifold. These hot gases come out through a converging nozzle with a high temperature and pressure and strike on the turbine results in the rotation of turbine wheel. A dynamo is connected which produces EMF. By this mechanism we can charge the battery. The main crankshaft can also be used to run a generator and supply electricity but this would mean that the transmission is to a large extent limited. So with this method we can transfer more percentage of power to the transmission.

The project is based on the Brayton cycle consist of two adiabatic work transfers and constant pressure heat transfer processes. At the first stage the gas undergo an isentropic, adiabatic compression. This stage increases the temperature pressure and density of the fluid. Second stage is the addition of heat at a constant pressure. In third stage the gas passes through an adiabatic, isentropic turbine which decreases the temperature and pressure of the gas. At the last stage the heated gas is removed.


2.2 Single Stage Impulse Turbine-

This model uses a single stage impulse turbine


WORK OUTPUT
F= Ms {Cw1-(-Cw0)}
= Ms(Cw1+Cw0)
F(axial) = Ms (Cfa - Cbl)
So,
W= Ms(Cw1-Cw0) Cbl






2.3 CFD VIRTUAL MODEL

A computational fluid dynamics technology that allow to study the dynamics of things that flow. We can built the computational model that represent a system that we want to study, than we apply the fluid flow properties to that model. CFD makes a virtual prototype of the device and the software will predict the output that related to the physical phenomena. So this method is a sophisticated computationally based
design and analysis techniques. It stimulates the flow of fluid, interaction of fluid and solid body, heat transfer, mass transfer and chemical reactions. Then we can apply the results of this virtual prototype in the real world physics.


OBJECTIVES:
3.1 Utilization of waste exhausts gas energy in electricity generation for battery
charging. Fabrication of turbo battery charging system.

3.2 Flow analysis of turbo battery charging system through CFD software


Our project have two aspects, one is practical aspect (that is the fabrication of turbo battery charger). We have already achieved this as our minor project. The second objective is to analyze the flow with software ‘..............’ and to compare the results with the practical results. This we are
doing second part as this project.





METHODOLOGY:
4.1 Practical part

A number of tests are performed on the prototype (average of three) at constant throttle varying load and constant load and varying throttle. Through the observations, results are calculated and graphs are plotted with final power output.


Calculations for tests on exhaust-
T= Sx R
S = reading of dial of hydraulic dynamometer ( final – initial , before starting the
engine), Kg
R= 0.32 m = distance from centre of dynamometer shaft to centre of spring balance
(dial) in m
BHP = (2.Π.N.T)/4500 horse power
1 horse power = 0.746 kW
So, B.P. in kW = (2.Π.N.T)/4500 X 0.746
Electric power =V.I watt


CFD solves the problem on the basis of finite volume method. Meshing is the division of objects into small-small set of finite volume called cells or grid.






The partial differential equations are converted into simple algebraic equations through discretization and then solved numerically to render the solution field. The results are achieved through a number of iterations and as much iteration we will do, as much as accuracy we can achieve. We have taken 2500 iterations to achieve efficient results.


4.3 Work output for turbine

Wturbine = ῃ . Cp . T4 (1-Tpr)(ɤ -1)/ ɤ ………………eq. 4.2
Where
ῃ = efficiency=1- T(outlet)/T(inlet)
Cp = specific heat at constant pressure
T4 = inlet temperature
Tpr= pressure ratio= P (outlet)/ P(inlet)
ɤ = 1.4 for exhaust gas






PRACTICAL RESULTS

Observations

5.1 Table for varying load:







5.2 Table for varying Throttle:




5.3 Calculations

Calculation for engine power:
T= Sx R
S = reading of dial of hydraulic dynamometer ( final – initial , before starting the
engine), Kg
R= 0.32 m = distance from centre of dynamometer shaft to centre of spring balance
(dial) in m
BHP = (2.Π.N.T)/4500 horse power
1 horse power = 0.746 kW
So, B.P. in kW = (2.Π.N.T)/4500 X 0.746
Electric power =V.I watt




To be continiue :)










































Sunday, August 19, 2012

Δίλημμα του φυλακισμένου



Στην Θεωρία Παιγνίων ένα πολύ γνωστό παιγνίδι είναι το "δίλημμα του φυλακισμένου" .
Οι παίκτες πρέπει να συνεργαστούν για να αποσπάσουν χρήματα απο έναν "τραπεζίτη" .
Βλέπε λεπτομέρειες στο εξαιρετικό βιβλίο "ΤΟ ΕΓΩΪΣΤΙΚΟ ΓΟΝΙΔΙΟ" του RICHARD DAWKINS , κεφάλαιο 12 .
Πάμπολλα φαινόμενα στην Βιολογία και στην Πολιτική εξηγούνται με αυτό το παιγνίδι .
Υπάρχουν πολλών ειδών στρατηγικές για να παίξεις το παιγνίδι .
Κάποιες αποκαλούνται "κακοπροαίρετες" (η πρώτη σου κίνηση είναι να προδώσεις τον άλλον παίκτη). Οι αντίθετες λέγονται "καλοπροαίρετες" . Κάποιες λέγονται "πολύ εκδικητικές" ( να απαντάς με πολλές προδοσίες σε μία προδοσία του άλλου παίκτη ) . Οι αντίθετες λέγονται "συγχωρητικές" .
Υπάρχουν και οι "ζηλόφθονες" και οι "μή ζηλόφθονες στρατηγικές" . Στην ζηλόφθονη στρατηγική με ενδιαφέρει ο άλλος παίκτης να μήν κερδίσει ΠΕΡΙΣΣΟΤΕΡΑ απο εμένα . Δηλαδή εάν έχω τις δύο επιλογές :
Α) Αποσπώ απο τον τραπεζίτη 100 ευρώ και ο άλλος παίκτης του αποσπά 99 .
Β) Αποσπώ απο τον τραπεζίτη 200 ευρώ και ο άλλος παίκτης αποσπά 300 .
τότε διαλέγω την Α !

Αυτό είναι τελείως παράλογο . Τα λεφτά δεν τα παίρνει ( ο άλλος παίκτης ) απο εμένα αλλά απο τον τραπεζίτη .
Η Νεα ταξη έχει πλήθος ψυχολόγων και γνωρίζει οτι ο πολύς λαός ρέπει στις ζηλόφθονες στρατηγικές Δείτε λοιπόν τί κάνει :
Βάζει τον κανόνα "ΓΙΑ ΚΑΘΕ ΔΕΚΑ ΔΑΝΕΙΑ ΣΕ ΝΟΙΚΟΚΥΡΗΔΕΣ ΘΑ ΔΙΝΟΥΜΕ ΚΑΙ ΕΝΑ ΚΑΤΑΝΑΛΩΤΙΚΟ ΣΕ ΡΕΜΑΛΙΑ".
Έτσι μετατρέπει το αφελές ρεμάλι σε "ψεύτικο λαγό" . Όταν έρθει η οικονομική κρίση , οι καλοί νοικοκύρηδες δεν θέλουν το κάψιμο των τραπεζών διότι θα παραγραφούν τα χρέη ΚΑΙ απο τα ρεμάλια ! Ο καλός νοικοκύρης κυνηγά τον "ψεύτικο λαγό" και δεν βλέπει τον πραγματικό του αντίπαλο ( που είναι η τράπεζα ) .
Έπειτα πηγαίνει ένας απεσταλμένος του τραπεζίτη ( δεν το λέει όμως ποιός τον έστειλε ) στο "ρεμάλι" και του λέει : "ΘΑ ΣΕ ΒΟΗΘΗΣΩ ΝΑ ΞΕΧΡΕΩΣΕΙΣ ΕΑΝ ΠΑΣ ΚΑΙ ΚΑΤΑΣΚΟΠΕΥΣΕΙΣ ΑΥΤΟΥΣ ΠΟΥ ΜΑΖΕΥΟΝΤΑΙ ΚΑΙ ΣΥΖΗΤΑΝΕ ΓΙΑ ΚΑΨΙΜΟ ΤΩΝ ΤΡΑΠΕΖΩΝ" !
Και έτσι χρησιμοποιεί το "ρεμάλι" για δεύτερη φορά !!!
Είναι ουσιώδες να αντιληφθούμε οτι και το ρεμάλι και ο νοικοκύρης δεν στέρησαν το χρήμα απο κανέναν . Ο neotaksikos τραπεζίτης δημιούργησε το χρήμα ΕΚ ΤΟΥ ΜΗΔΕΝΟΣ πληκτρολογώντας το σε έναν υπολογιστή . Αν παραγραφούν τα χρέη δεν θα υπάρξει κάποιος να παραπονεθεί "ΜΟΥ ΣΤΕΡΗΣΑΤΕ ΤΑ ΛΕΦΤΑ ΜΟΥ" .
Δημιουργώντας χρήμα εκ του μηδενός , τους έδωσε το δικαίωμα στην σπατάλη πετρελαίου.
Το ρεμάλι το έδωσε στα ψαροκάϊκα για να κινηθούν και να του φέρουν γαρίδες .
Ο νοικοκύρης το έδωσε στην τσιμεντοβιομηχανία για να κάνει τσιμέντο .
Δημιούργησε ένα τσιμεντένιο όγκο άχρηστο για τις επόμενες γενεές . Το σπίτι αυτό για να λειτουργήσει χρειάζεται να σπαταλά διαρκώς πετρέλαιο . Αν η κοινωνία εξυγιανθεί κάποτε , θα πρέπει να το κατεδαφίσει .
Είναι ουσιώδες λοιπόν να αντιληφθούμε οτι ΟΛΟΙ μας υπήρξαμε πιόνια της νεας ταξης .
Οι δήθεν "νοικοκύρηδες" χρησιμοποιήθηκαν για να δημιουργήσουν τον πλούτο ( κτίρια κλπ ) που θα κατασχεθεί και τα δήθεν "ρεμάλια" χρησιμοποιήθηκαν για να αποπροσανατολίσουν τους "νοικοκύρηδες" .
Όλοι μας τσιμπήσαμε κάποιο δόλωμα .
Είναι ουσιώδες να αντιληφθούμε οτι οι "νοικοκύρηδες" φταίνε ΠΕΡΙΣΣΟΤΕΡΟ για την κρίση.
Δείτε πώς :
Ο "νοικοκύρης" ήθελε να γίνει τεχνίτης αυτοκινήτων .
Του λέει η νεα ταξη "Πούλα το χωράφι σου , πάρε και ΔΑΝΕΙΟ και πήγαινε στην ΠΟΛΗ για να ανοίξεις το μαγαζί" .
Το χωράφι το αγόρασε κάποιος τσιφλικάς που σήμερα έχει χίλια στρέμματα που τα καλλιεργεί με λαθρομετανάστες .
Ποιός λοιπόν ευθύνεται ( εν μέρει ) για την εισροή λαθρομεταναστών ;
Ο "νοικοκύρης" ή το "ρεμάλι" που έτρωγε γαρίδες με τα λεφτά του δανείου ;
Ποιός ευθύνεται για την συσσώρευση του πληθυσμού στις πόλεις ;
Ο εργατικός "νοικοκύρης" που έφυγε απο το χωριό ή το "ρεμάλι" που έτρωγε γαρίδες ;
Είναι ουσιώδες να αντιληφθούμε οτι οι "νοικοκύρηδες" ήταν μεγαλύτερα κορόϊδα απο τα "ρεμάλια" .
Οι νοικοκύρηδες έχτισαν τα κτίρια που τώρα θα κατασχεθούν ( με τα διάφορα χαράτσια ) και δεν απόλαυσαν και τις γαρίδες .
Τα "ρεμάλια" απόλαυσαν τις γαρίδες και οι τράπεζες δεν θα βρούν τίποτα να κατασχέσουν !
Ας υποθέσουμε οτι είμασταν πονηροί και δεν παίρναμε κανένα στεγαστικό δάνειο .
Βάζαμε αυτούς που δεν είχαν ακίνητα να παίρνουν μόνο καταναλωτικά δάνεια και να μας τα μοιράζουν .
Τί θα γινόταν τότε ;
Υποπτεύομαι οτι δεν θα έδιναν ΟΥΤΕ ΕΝΑ καταναλωτικό δάνειο ( αφού ο κανόνας ήταν ένα καταναλωτικό για δέκα στεγαστικά ) !
Είναι ουσιώδες να αντιληφθούμε οτι όλοι μας είμαστε ΣΥΝΥΠΕΥΘΥΝΟΙ .
Τα "ρεμάλια" μπορούν να ισχυρισθούν "ΕΣΕΙΣ ΟΙ ΝΟΙΚΟΚΥΡΗΔΕΣ ΜΕ ΤΗΝ ΑΠΛΗΣΤΙΑ ΣΑΣ ΑΝΕΒΑΣΑΤΕ ΤΙΣ ΤΙΜΕΣ ΤΩΝ ΑΚΙΝΗΤΩΝ ΣΤΑ ΥΨΗ . ΑΝ ΕΣΕΙΣ ΕΙΧΑΤΕ ΑΡΚΕΣΘΕΙ ΣΕ ΕΝΑ ΜΟΝΟ ΑΚΙΝΗΤΟ Ο ΚΑΘΕΝΑΣ , ΟΙ ΤΙΜΕΣ ΘΑ ΗΤΑΝ ΧΑΜΗΛΟΤΕΡΕΣ ΚΑΙ ΘΑ ΕΙΧΑ ΑΓΟΡΑΣΕΙ ΚΑΙ ΕΓΩ ΣΠΙΤΙ" .
Οι νοικοκύρηδες θα ισχυρισθούν "ΕΣΕΙΣ ΤΑ ΡΕΜΑΛΙΑ ΜΕ ΤΗΝ ΥΠΕΡΒΟΛΙΚΗ ΖΗΤΗΣΗ ΓΙΑ ΓΑΡΙΔΕΣ ΑΝΕΒΑΣΑΤΕ ΤΙΣ ΤΙΜΕΣ ΤΟΥΣ ΣΤΑ ΥΨΗ . ΑΝ ΔΕΝ ΕΙΣΑΣΤΑΝ ΕΣΕΙΣ , ΟΙ ΓΑΡΙΔΕΣ ΘΑ ΕΙΧΑΝ ΧΑΜΗΛΟΤΕΡΕΣ ΤΙΜΕΣ ΚΑΙ ΘΑ ΤΙΣ ΕΙΧΑΜΕ ΑΠΟΛΑΥΣΕΙ ΚΑΙ ΕΜΕΙΣ"
Είναι ουσιώδες να αντιληφθούμε οτι οι χαρακτηρισμοί "νοικοκύρης" και "ρεμάλι" δίνονται απο την σάπια κοινωνία που ζούμε και ίσως δεν έχουν καμμία σχέση με το ποιόν του καθενός .
Το "ρεμάλι" έγινε ρεμάλι μέσα σε μια άρρωστη κοινωνία που μοίραζε αφειδώς δάνεια .
Μέσα σε μια κοινωνία με σωστούς ηγέτες ίσως να ήταν ένας φιλήσυχος άνθρωπος ή ένας άριστος νοσοκόμος που θα μας ξάφνιαζε με τον αλτρουϊσμό του .
Ο "νοικοκύρης" έγινε νοικοκύρης μέσα σε μια άρρωστη κοινωνία που του έλεγε "Είναι θεμιτό να ξοδέψεις την ζωή σου στιβιάζοντας υλικό πλούτο" .
Μέσα σε μια κοινωνία με σωστούς ηγέτες ίσως να ήταν ένα μίζερο ανθρωπάκι που θα νοιαζόταν μόνο για τον εαυτούλη του και θα μάλωνε συνεχώς με τον γείτονα .
ο να νικήσουμε την nea taksi είναι κάτι δύσκολο .
Είναι δύσκολο διότι πρέπει ΝΑ ΞΕΠΕΡΑΣΟΥΜΕ ΤΟΝ ΕΑΥΤΟ ΜΑΣ !
Να αποβάλλουμε τις πιθήκειες ζηλόφθονες συμπεριφορές που γέννησαν την νεα ταξη.

Wednesday, August 15, 2012

Μέθοδοι επικράτησης φιλοαμερικανικών καθεστώτων







Οι δύο πόλεμοι που αναμείχθηκαν ενεργά αμερικανικές στρατιωτικές δυνάμεις, στο Ιράκ και το Αφγανιστάν, έχουν στοιχίσει πανάκριβα στον αμερικανικό λαό. Σύμφωνα με υπολογισμούς του γνωστού μας Joseph Stiglitz, μόνο ο πόλεμος στο Ιράκ κόστισε στους αμερικανούς φορολογούμενους πλέον τρν τριών τρισεκατομμυρίων $. Χώρια τα έξοδα για τον πόλεμο στο Αφγανιστάν, που συνεχίζεται για 11ο χρόνο, χωρίς να υπάρχει προοπτική νίκης.

Μην ξεχνάμε πως ο ψηφισμένος ως ειρηνιστής πρόεδρος Ομπάμα, αμέσως μετά την εκλογή του έστειλε κι άλλα στρατεύματα στο Αφγανιστάν, εντείνοντας τον πόλεμο, χωρίς ουσιαστικό κέρδος.


Ο Αμερικανοί, εκτός από την αυξανόμενη ανεργία και την κακή οικονομική κατάσταση της χώρας, βλέπουν (όσοι έχουν ακόμα εργασία) τους μισθούς τους να είναι καθηλωμένοι στα επίπεδα του 2005, χωρίς να έχουν να κερδίσουν κάτι από τους πολέμους. Το πολεμικό χρέος δεν αναμένεται να ξεπληρωθεί, και οι αμερικανοί πολίτες και οι απόγονοί τους είναι χρεωμένοι με πλέον των 6.000 δισεκατομμυρίων.

Παρά τα οικονομικά χάλια η Ουάσιγκτον δεν εγκαταλείπει τα ηγεμονικά της σχέδια. Μόνο που τώρα δείχνει καθαρά την προτίμησή της στη μέθοδο των χρωματιστών επαναστάσεων.


Τι θυμίζει ο Thiery Meyssan (1) στο Information Clearing House:

«Το 1985, ένας κοινωνικός επιστήμονας ο Gene Sharp, δημοσίευσε μελέτη κατά παραγγελία του ΝΑΤΟ, με τίτλο «Πως θα γίνει η Ευρώπη απόρθητη». Υποστηρίζοντας πως μία κυβέρνηση δύναται να υπάρχει μόνο όταν οι υπήκοοί της συμφωνούν να την υπακούουν.


Λίγα χρόνια αργότερα, το 1989 στον Sharp, ανατέθηκε από την CIA να υλοποιήσει μια «θεωρητική προσέγγιση» για την Κίνα. Οι ΗΠΑ σχεδίαζαν να ανατρέψουν τον Deng Xiaoping για χάρη του Zhao Ziyang. Το σχέδιο της CIA ήταν να εφαρμόσει την ίδια παρωδία με την ανατροπή του Mohammed Mossadegh όταν είχε προσλάβει διαδηλωτές στην Τεχεράνη (Επιχείρηση Ajax, 1953). Η διαφορά είναι ότι ο Gene Sharp είχε να βασιστεί σε ένα μίγμα φίλα προσκείμενων στον Ζάο αλλά και στις ΗΠΑ νεαρών Κινέζων, ώστε το πραξικόπημα να μοιάζει με επανάσταση. Μόνο που ο Ντενγκ συνέλαβε τον Σαρπ στην πλατεία Τιενανμέν και τον απέλασε από την χώρα. Το πραξικόπημα απέτυχε πριν προλάβει η CIA να δυσφημίσει τον Ντενγκ για την καταστολή.

Αλλά ο Σαρπ συνεχίσει την δραστηριότητά τουμε εκπαιδευτικά προγράμματα για νεαρούς ακτιβιστές με στόχο την οργάνωση πραξικοπημάτων. Μετά από μερικές επιτυχίες στη Ρωσία και τις χώρες της Βαλτικής στα 1998 εφηύρε τη μέθοδο των «χρωματιστών επαναστάσεων» με πρώτη επιτυχία την ανατροπή του Σλομπόνταν Μιλόσεβιτς στη Σερβία.


Όταν όμως ο Ούγκο Τσάβεζ, ακολουθώντας τη μέθοδο Σαρπ, πέτυχε να πάρει την εξουσία με πραξικόπημα στη Βενεζουέλα, ο Σαρπ διέκοψε τις δραστηριότητες του Albert Einstein Institute, που αποτελούσε τη βιτρίνα και δημιούργησε νέες δομές. Όπως το Ινστιτούτο (CANVAS στο Βελιγράδι, και τις Ακαδημίες της Αλλαγής στο Λονδίνο, τη Βιέννη και τη Ντόχα).

Τα αποτελέσματα της λειτουργάι των ακαδημιών αυτών τα είδαμε ειδικότερα στο Λίβανο (Cedar Revolution), στο Ιράν (Green Revolution), την Τυνισία (Jasmine Revolution) και την Αίγυπτο (Lotus Revolution).


Η διεθνής κοινή γνώμη εύκολα κατάπινε τις χρωματιστές επαναστάσεις βοηθούντων των Μέσων Μαζικής Αποβλάκωσης. Τα οποία εύκολα μπερδεύουν το πλήθος και το λαό. Στην Αίγυπτο, ουδέποτε μεταδόθηκε πως ο Μουμπάρακ δεν υποχρεώθηκε να παραιτηθεί από τους διαδηλωτές, αλλά από την εντολή που του έδωσε ο αμερικανός πρεσβευτής Frank Wisner.

Το νόημα των χρωματιστών επαναστάσεων μπορεί να συνοψιστεί στο ότι εκείνο που έχει σημασία είναι η ανατροπή του επικεφαλής του κράτους, χωρίς να υπολογιστούν οι άλλες επιπτώσεις. «Μην ανησυχείτε για το μέλλον σας. Η Ουάσιγκτον θα φροντίσει για σας». Όταν ο λαός πάρει είδηση τι συνέβη, είναι πια αργά.


Στην περίπτωση της Λιβύης όμως πέρυσι, όσο και της Συρίας εφέτος, ακολουθήθηκε άλλη μέθοδος. Με μισθοφόρους επαναστάτες.


----


(1) Ο Thierry Meyssan, ιδρυτής και πρόεδρος του Voltaire Network και του Axis for Peace Conference. Καθηγητής Διεθνών Σχέσεων στο Centre for Strategic Studies της Δαμασκού. Άρθρα του για τις διεθνείς σχέσεις δημοσιεύονται σε αραβικές, ισπανικές και ρωσικές εφημερίδες και περιοδικά. Τα δύο τελευταία του βιβλία: 9/11 the Big Lie και το Pentagate. Το πρώτο έχει μεταφραστεί και στα ελληνικά.

(styx.gr)

Τμήμα ειδήσεων defencenet.gr

Tuesday, June 12, 2012

Building Catamarans and Trimarans

On this publish i will transfer you my knowlwnce on building a catamaran , trimaran to say the true.... ;)


We will start from design, then we will move to CFD analysis, Structural analysis, Composite optimization.... manufacturing process.... and finaly we will build that using our hand.... great story that inspire people that love sea....


Keep connected to study this great hobby...

Tuesday, March 13, 2012

CFD TOPOLOGY AND SHAPE OPTIMIZATION WITH ADJOINT METHODS

Automated process chains for optimal fluid dynamics design are gaining
importance in automotive applications. So far, industrial implementations of optimal design processes in fluid dynamics are mostly restricted to shape optimization with bionic algorithms. However, on the basis of the recent progress in fluid dynamic topology optimization, as well as in industrial applications of adjoint-based shape design, we propose an adjoint-based design process chain comprising both topology and shape optimization. Starting from the available installation space, this approach delivers a tailored optimal geometry, making use of the whole potential of the available design space at each stage. The central element of this design process is the computation of sensitivity maps – for both topological and shape sensitivities.
1 CFD optimization: current status and limitations The classical way of part design for industrial applications comprises an iteration between the design engineer and the measurement or computation department. Implementing automatic optimization methods into the development process has the potential of shortening this iteration significantly. Such methods are based on a parametric geometry description and automatically yield a design that is optimal with respect to the desired properties and to the imposed constraints.
The techniques that are currently being employed for CFD optimization tasks in the
automotive development process are mainly robust workhorses of the bionic type, i.e.
genetic algorithms and evolutionary strategies [1]-[4]. Typical applications range from air ducts for cabin ventilation over intake ports to engine cooling jackets and exhaust systems.
Although successfully applied in the series development process and being by far more
effective than the conventional design process of trial and error, the limits of these methods are quickly reached: (1) Their computational cost puts a hard constraint on the affordable number of design parameters, i. e. on the explorable design space, and (2) an efficient CAD parametrization with, on the one hand, a maximum of design freedom and on the other, a complete controllability in terms of given design domain restrictions is not a trivial task at all.
Thse two aspects are the actual challenges of current CFD optimization methodologies.
Possible remedies are (1) the use of adjoint methods, where the cost of a sensitivity
computation is independent of the number of design variables, and (2) to perform the
optimization with a CAD-free geometry description, i. e. a surface mesh for shape optimization and a volume mesh for topology optimization, respectively [5, 6]. What this looks like for typical automotive optimization tasks will be demonstrated in the remainder of this paper. We first introduce the idea of adjoint-based computation of sensitivities, apply the methdology to the Navier-Stokes equations and employ it to compute topological sensitivities of air ducts. Recent results of the application of a commercial adjoint solver to drag reduction of a complete passenger car are shown, before the paper closes by pointing out the open issues on the road towards an adjoint-based CFD optimization process chain comprising both topology and shape optimization.

2 Computation of sensitivities with adjoint methods
While already established in the aerospace sector, adjoint methods have been recognized by the automotive industry as an efficient optimization tool only recently [6, 7]. The adjoint approach to optimal design consists of (a) computing the sensitivities of the cost function via an adjoint state, and (b) feeding these sensitivities into a gradient-based optimization algorithm [8]-[11]. Gradient-based algorithms can of course be employed without making use of adjoint states. In that case, however, the conventional computation
of sensitivities of the cost function J wrt. the design parameters = ( 1, . . . , n)T
via finite differences dJ d = J( + k) − J( ) k
for each k, incurs a computational cost of n + 1 solver calls. On the other hand, using an adjoint state, the whole sensitivity can be obtained via one call to the CFD solver (“primal”) and one call to the adjoint solver (“dual”), i. e. via two solver calls - independent of the number of design variables n. Thus, especially for problems with a huge number of design parameters, this method pays off.
It is this characteristic of the adjoint method – its cost independence of the number of design variables – that opens up unparalleled possibilities for design optimization. One oes not have to concern oneself anymore with a complicated CAD parametrization, but – for the sake of maximum design freedom – can draw on plentiful resources: surface mesh or volume mesh representations. The design parameters are then the normal displacements of each of the surface nodes or the porosity value of each volume cell, respectively. Thus, one is dealing with a number of design variables of the order of the order of 105 or even more which
cannot be handled by conventional methods anymore.

3 Topological sensitivities
In structure mechanics, topology optimization is a well-established concept for design optimization with respect to tension or stiffness [12]. Its transfer to computational fluid dynamics, however, just began three years ago with the pioneering work of Borrvall and Petersson [13]. Since then, this topic has received quite some interest both in academia and in the industry [14]-[21]. The starting point for fluid dynamic topology optimization is a volume mesh of the entire installation space. Based on a computation of the flow solution inside this domain, a suitable local criterion is applied to decide whether a fluid cell is “good” or “bad” for the flow in terms of the chosen cost function. In order to iteratively remove the identified
bad cells from the fluid domain, they are either punished via a momentum loss term, or holes are inserted into the flow domain, with their positions being determined from an evaluation of the so-called topological asymptotic.
In the former case, the momentum loss term is usually realized via a finite cell porosity, i. e. the whole design domain is treated as a porous medium: Each cell is assigned an individual porosity i, which is modeled via Darcy’s law. The value of i determines if the cell is fluid-like (low porosity values) or has a rather solid character (high values of i). In other words, the porosity field controls the geometry, and the i are the actual design variables.
With such a setting, an adjoint method can be applied to elegantly compute the sensitivities of the chosen cost function wrt. the porosity of each cell. The obtained sensitivities can then be fed into a gradient-based optimization algorithm – possibly with some penalization of intermediate porosity values in order to enforce a “digital” porosity distribution, and after several iterations, the desired optimum topology is finally extracted as an isosurface of the obtained porosity distribution or simply as the collection of all non-porous cells.
In a recent study, Othmer et al. [21] were able to verify the applicability of this methodology to typical automotive objective functions, including dissipated power, equal mass flow through different outlets, flow uniformity and angular momentum of the flow in the outlet plane. In that proof-of-concept study, Automatic Differentiation techniques were applied to an academic CFD code in order to obtain a discrete adjoint solver. For industrial-sized problems, however, this code is not suitable. Therefore, we implemented the methodology via a continuous adjoint into the professional CFD environment Open- FOAM [22]. The underlying equations of this implementation will be shown in the following section, before we show examples of topological sensitivity maps for an air duct segment.

to be continiue

Sunday, December 18, 2011

A Unified Platform for CFD Simulation



Older CFD simulation programs fragment their user environment into three separate programs: model generation, model simulation, and model visualization. These subprograms then share data through a common file space or through information pipes. This program flow provides the most benefit to users who have fleshed out their numerical design in advance, and penalizes users who switch back and forth between subprograms. However, most architects and HVAC engineers desire interactivity, unity and fluidity between the model generation, CFD computation, and results visualization stages. In particular, the following five stages of CFD simulation design as shown in Figure 4 are commonly executed.  In the initial generation phase, the user gives a shell description of the problem to be simulated. This typically includes specifying a small subset of the physical and computational parameter sets, including adding the room’s objects and indicating the level of computational accuracy desired. The computation phase is handled by the CFD engine chosen by the user. The results are then forwarded to the visualization phase, where the user analyzes the
 esults. At this point, the user may choose to enter the model modification phase and solve again, or save the
 results for the presentation phase. Examples of slight  model modifications include minor alterations to the
  oom geometry, changing airflow rate or direction,  increasing the density of the mesh topology (to
 investigate a particular flow detail), or altering other  parameters to achieve finer results. This investigation
 endeavored to create an interface that allowed rapid   and seamless transition between the five stages of
 
CFD simulation design.

SCI combines all three applications into a single workspace, eliminating any wasted time or effort
 incurred by application switching. To achieve this  result, a window with a large, central, blank area is
 created for 3-D visualizations and presentation animations. There are two dialog boxes in the
 interface. The first dialog box controls the visualizations viewed in the main window, and the
 second dialog box commands the model layout tools. A generic menu bar controls all other
 parameterizations with four separate tools: a mesh topology tool, a problem description tool, an iteration
 ontrol tool, and a simulation properties tool.  Activating any of the tools launches dialog boxes that
 assist the user through the process. To avoid  workspace clutter, these boxes disappear as soon as
 they are no longer needed. Moving to the computation stage requires the pressing of a button marked “GO”
 on the toolbar. Thus, all five stages are represented on the main window, less than a single mouse-click
 away. Automating Model Format Translation for Rapid Model Development and Multiple Simulation
 Many professional CFD packages require their users to specify the layout of the room using a foreign or
 unfamiliar methodology. Sometimes the topology of the mesh is used as a physical reference to locate
 physical items, such as walls, tables, and chairs (this is k nown as a logical coordinate system as indicated
 in Figure 5(a)). At other times, the user is prompted for the precise distance of objects from a common
 reference point (known as a physical coordinate system as illustrated in Figure 5(b)). If a user switches
 from a CFD solver that uses the former system to one that uses the latter, then the user must recast the
 model’s object into the new format. In many cases, whenever the user switches CFD simulation software,
 he or she must reconstruct the entire building design using the methodology of the new CFD software.
 This process of reconstruction impedes the success of  many CFD user interfaces. Two immediate solutions
to this problem involve automating the process of transforming the model from one CFD software data
 format to another. This first solution is to adapt a  building environment file format standard. An
 international consortium of programmers known as the International Alliance for Interoperability has
 established a standard building file format known as IFC, or Industrial Foundation Class, to realize this
 solution. Building environment simulators, such as CFD simulators, are to include the ability to
 automatically translate IFC files into their own desired format, thus eliminating the necessity of
 involving the user beyond the initial generation. The other solution is to only ever use one single interface,
 and hope the interface can internally handle translations needed to run the different CFD solvers.
 This solution is similar in essence to how AutoCAD lug-ins behave – AutoCAD is the single interface
 where a model is created, and the plug-ins give and receive model data to the interface. The first solution
 is a smart-application solution and the second is a smart-interface solution, since the first requires
 additional intelligence built into the simulation software and the second requires additional
intelligence built into an umbrella interface

A translator for reading IFC-formatted files and converting them to our own, internal SCI format is
 included to implement the smart-application solution. In addition, an IFC exporting utility is included,
 should the user want any geometry changes made in SCI to be recognized by other IFC-compliant building
 simulation tools. In addition to IFC compliance, we also included a STL (Stereolithography) geometry file
 [1] translation tool, to read model geometry directly from AutoCAD.
 The implementation of the smart-interface solution allows SCI to work with more than just one
 underlying CFD numerical simulator. Once the model is translated into the SCI format, we can send it to as
 many CFD simulators as we have written translator  modules. Currently, we have two translator modules.
 The modules are an interface for a CFD code to provide SCI data in a specific format. The modules
 can be written in any program language.