Tuesday, June 12, 2012

Building Catamarans and Trimarans

On this publish i will transfer you my knowlwnce on building a catamaran , trimaran to say the true.... ;)


We will start from design, then we will move to CFD analysis, Structural analysis, Composite optimization.... manufacturing process.... and finaly we will build that using our hand.... great story that inspire people that love sea....


Keep connected to study this great hobby...

Tuesday, March 13, 2012

CFD TOPOLOGY AND SHAPE OPTIMIZATION WITH ADJOINT METHODS

Automated process chains for optimal fluid dynamics design are gaining
importance in automotive applications. So far, industrial implementations of optimal design processes in fluid dynamics are mostly restricted to shape optimization with bionic algorithms. However, on the basis of the recent progress in fluid dynamic topology optimization, as well as in industrial applications of adjoint-based shape design, we propose an adjoint-based design process chain comprising both topology and shape optimization. Starting from the available installation space, this approach delivers a tailored optimal geometry, making use of the whole potential of the available design space at each stage. The central element of this design process is the computation of sensitivity maps – for both topological and shape sensitivities.
1 CFD optimization: current status and limitations The classical way of part design for industrial applications comprises an iteration between the design engineer and the measurement or computation department. Implementing automatic optimization methods into the development process has the potential of shortening this iteration significantly. Such methods are based on a parametric geometry description and automatically yield a design that is optimal with respect to the desired properties and to the imposed constraints.
The techniques that are currently being employed for CFD optimization tasks in the
automotive development process are mainly robust workhorses of the bionic type, i.e.
genetic algorithms and evolutionary strategies [1]-[4]. Typical applications range from air ducts for cabin ventilation over intake ports to engine cooling jackets and exhaust systems.
Although successfully applied in the series development process and being by far more
effective than the conventional design process of trial and error, the limits of these methods are quickly reached: (1) Their computational cost puts a hard constraint on the affordable number of design parameters, i. e. on the explorable design space, and (2) an efficient CAD parametrization with, on the one hand, a maximum of design freedom and on the other, a complete controllability in terms of given design domain restrictions is not a trivial task at all.
Thse two aspects are the actual challenges of current CFD optimization methodologies.
Possible remedies are (1) the use of adjoint methods, where the cost of a sensitivity
computation is independent of the number of design variables, and (2) to perform the
optimization with a CAD-free geometry description, i. e. a surface mesh for shape optimization and a volume mesh for topology optimization, respectively [5, 6]. What this looks like for typical automotive optimization tasks will be demonstrated in the remainder of this paper. We first introduce the idea of adjoint-based computation of sensitivities, apply the methdology to the Navier-Stokes equations and employ it to compute topological sensitivities of air ducts. Recent results of the application of a commercial adjoint solver to drag reduction of a complete passenger car are shown, before the paper closes by pointing out the open issues on the road towards an adjoint-based CFD optimization process chain comprising both topology and shape optimization.

2 Computation of sensitivities with adjoint methods
While already established in the aerospace sector, adjoint methods have been recognized by the automotive industry as an efficient optimization tool only recently [6, 7]. The adjoint approach to optimal design consists of (a) computing the sensitivities of the cost function via an adjoint state, and (b) feeding these sensitivities into a gradient-based optimization algorithm [8]-[11]. Gradient-based algorithms can of course be employed without making use of adjoint states. In that case, however, the conventional computation
of sensitivities of the cost function J wrt. the design parameters = ( 1, . . . , n)T
via finite differences dJ d = J( + k) − J( ) k
for each k, incurs a computational cost of n + 1 solver calls. On the other hand, using an adjoint state, the whole sensitivity can be obtained via one call to the CFD solver (“primal”) and one call to the adjoint solver (“dual”), i. e. via two solver calls - independent of the number of design variables n. Thus, especially for problems with a huge number of design parameters, this method pays off.
It is this characteristic of the adjoint method – its cost independence of the number of design variables – that opens up unparalleled possibilities for design optimization. One oes not have to concern oneself anymore with a complicated CAD parametrization, but – for the sake of maximum design freedom – can draw on plentiful resources: surface mesh or volume mesh representations. The design parameters are then the normal displacements of each of the surface nodes or the porosity value of each volume cell, respectively. Thus, one is dealing with a number of design variables of the order of the order of 105 or even more which
cannot be handled by conventional methods anymore.

3 Topological sensitivities
In structure mechanics, topology optimization is a well-established concept for design optimization with respect to tension or stiffness [12]. Its transfer to computational fluid dynamics, however, just began three years ago with the pioneering work of Borrvall and Petersson [13]. Since then, this topic has received quite some interest both in academia and in the industry [14]-[21]. The starting point for fluid dynamic topology optimization is a volume mesh of the entire installation space. Based on a computation of the flow solution inside this domain, a suitable local criterion is applied to decide whether a fluid cell is “good” or “bad” for the flow in terms of the chosen cost function. In order to iteratively remove the identified
bad cells from the fluid domain, they are either punished via a momentum loss term, or holes are inserted into the flow domain, with their positions being determined from an evaluation of the so-called topological asymptotic.
In the former case, the momentum loss term is usually realized via a finite cell porosity, i. e. the whole design domain is treated as a porous medium: Each cell is assigned an individual porosity i, which is modeled via Darcy’s law. The value of i determines if the cell is fluid-like (low porosity values) or has a rather solid character (high values of i). In other words, the porosity field controls the geometry, and the i are the actual design variables.
With such a setting, an adjoint method can be applied to elegantly compute the sensitivities of the chosen cost function wrt. the porosity of each cell. The obtained sensitivities can then be fed into a gradient-based optimization algorithm – possibly with some penalization of intermediate porosity values in order to enforce a “digital” porosity distribution, and after several iterations, the desired optimum topology is finally extracted as an isosurface of the obtained porosity distribution or simply as the collection of all non-porous cells.
In a recent study, Othmer et al. [21] were able to verify the applicability of this methodology to typical automotive objective functions, including dissipated power, equal mass flow through different outlets, flow uniformity and angular momentum of the flow in the outlet plane. In that proof-of-concept study, Automatic Differentiation techniques were applied to an academic CFD code in order to obtain a discrete adjoint solver. For industrial-sized problems, however, this code is not suitable. Therefore, we implemented the methodology via a continuous adjoint into the professional CFD environment Open- FOAM [22]. The underlying equations of this implementation will be shown in the following section, before we show examples of topological sensitivity maps for an air duct segment.

to be continiue

Sunday, December 18, 2011

A Unified Platform for CFD Simulation



Older CFD simulation programs fragment their user environment into three separate programs: model generation, model simulation, and model visualization. These subprograms then share data through a common file space or through information pipes. This program flow provides the most benefit to users who have fleshed out their numerical design in advance, and penalizes users who switch back and forth between subprograms. However, most architects and HVAC engineers desire interactivity, unity and fluidity between the model generation, CFD computation, and results visualization stages. In particular, the following five stages of CFD simulation design as shown in Figure 4 are commonly executed.  In the initial generation phase, the user gives a shell description of the problem to be simulated. This typically includes specifying a small subset of the physical and computational parameter sets, including adding the room’s objects and indicating the level of computational accuracy desired. The computation phase is handled by the CFD engine chosen by the user. The results are then forwarded to the visualization phase, where the user analyzes the
 esults. At this point, the user may choose to enter the model modification phase and solve again, or save the
 results for the presentation phase. Examples of slight  model modifications include minor alterations to the
  oom geometry, changing airflow rate or direction,  increasing the density of the mesh topology (to
 investigate a particular flow detail), or altering other  parameters to achieve finer results. This investigation
 endeavored to create an interface that allowed rapid   and seamless transition between the five stages of
 
CFD simulation design.

SCI combines all three applications into a single workspace, eliminating any wasted time or effort
 incurred by application switching. To achieve this  result, a window with a large, central, blank area is
 created for 3-D visualizations and presentation animations. There are two dialog boxes in the
 interface. The first dialog box controls the visualizations viewed in the main window, and the
 second dialog box commands the model layout tools. A generic menu bar controls all other
 parameterizations with four separate tools: a mesh topology tool, a problem description tool, an iteration
 ontrol tool, and a simulation properties tool.  Activating any of the tools launches dialog boxes that
 assist the user through the process. To avoid  workspace clutter, these boxes disappear as soon as
 they are no longer needed. Moving to the computation stage requires the pressing of a button marked “GO”
 on the toolbar. Thus, all five stages are represented on the main window, less than a single mouse-click
 away. Automating Model Format Translation for Rapid Model Development and Multiple Simulation
 Many professional CFD packages require their users to specify the layout of the room using a foreign or
 unfamiliar methodology. Sometimes the topology of the mesh is used as a physical reference to locate
 physical items, such as walls, tables, and chairs (this is k nown as a logical coordinate system as indicated
 in Figure 5(a)). At other times, the user is prompted for the precise distance of objects from a common
 reference point (known as a physical coordinate system as illustrated in Figure 5(b)). If a user switches
 from a CFD solver that uses the former system to one that uses the latter, then the user must recast the
 model’s object into the new format. In many cases, whenever the user switches CFD simulation software,
 he or she must reconstruct the entire building design using the methodology of the new CFD software.
 This process of reconstruction impedes the success of  many CFD user interfaces. Two immediate solutions
to this problem involve automating the process of transforming the model from one CFD software data
 format to another. This first solution is to adapt a  building environment file format standard. An
 international consortium of programmers known as the International Alliance for Interoperability has
 established a standard building file format known as IFC, or Industrial Foundation Class, to realize this
 solution. Building environment simulators, such as CFD simulators, are to include the ability to
 automatically translate IFC files into their own desired format, thus eliminating the necessity of
 involving the user beyond the initial generation. The other solution is to only ever use one single interface,
 and hope the interface can internally handle translations needed to run the different CFD solvers.
 This solution is similar in essence to how AutoCAD lug-ins behave – AutoCAD is the single interface
 where a model is created, and the plug-ins give and receive model data to the interface. The first solution
 is a smart-application solution and the second is a smart-interface solution, since the first requires
 additional intelligence built into the simulation software and the second requires additional
intelligence built into an umbrella interface

A translator for reading IFC-formatted files and converting them to our own, internal SCI format is
 included to implement the smart-application solution. In addition, an IFC exporting utility is included,
 should the user want any geometry changes made in SCI to be recognized by other IFC-compliant building
 simulation tools. In addition to IFC compliance, we also included a STL (Stereolithography) geometry file
 [1] translation tool, to read model geometry directly from AutoCAD.
 The implementation of the smart-interface solution allows SCI to work with more than just one
 underlying CFD numerical simulator. Once the model is translated into the SCI format, we can send it to as
 many CFD simulators as we have written translator  modules. Currently, we have two translator modules.
 The modules are an interface for a CFD code to provide SCI data in a specific format. The modules
 can be written in any program language.

Thursday, July 14, 2011

Μόσχα: "Δίναμε 25 δισ ευρώ και ο Γιώργος μιλούσε για οικολογία"!

Eπικίνδυνη τροπή για τα ελληνικά συμφέροντα αρχίζει και λαμβάνει η κρίση που υπάρχει στις ελληνορωσικές σχέσεις. Η ακύρωση της επίσκεψης του ΥΠΕΞ Σταύρου Λαμπρινίδη στην Μόσχα με αίτημα της ρωσικής πλευράς λόγω "μη ύπαρξης αντικειμένου στις ελληνορωσικές σχέσεις" (!) είναι απίστευτη. Θύμισε την αντίστοιχη ακύρωση της επίσκεψη Γκρομίκο, του τότε ΥΠΕΞ της ΕΣΣΔ, πριν τις εκλογές του 1989 στην Αθήνα, όταν η τότε κυβέρνηση Α.Παπανδρέου, έπνεε τα λοίσθια.

Αλλά υπήρξε και δεύτερο κτύπημα από την Μόσχα: Σε συνέντευξή του ο Ιβάν Σαββίδης, βουλευτής της Κρατικής Δούμας και πρόεδρος της Ομοσπονδίας της Ομοσπονδίας Ελληνικών Κοινοτήτων Ρωσίας στην «Ελευθεροτυπία» είναι πραγματικός "καταπέλτης". Μιλάει για "χαμηλότοκο δάνειο 25 δισ. ευρώ που θα προσέφερε στον Γ.Παπανδρέου ο Β.Πούτιν, για να γλυτώσι η χώρα από το Μνημόνιο (να σημειώσουμε ότι ο Γ.Παπανδρέου στην σύκσεψη των πολιτικών αρχηγών είχε αρνηθεί ότι ο οποιοσδήποτε του είχε προτείνει οικονομική βοήθεια και για τον λόγο αυτό "Αναγκάστηκε να υπογράψει το Μνημόνιο"), αλλά αντί να τεθεί τέτοιο ζήτημα, ο Γ.Παπανδρέου του μιλούσε για ... οικολογία!


Στην συνέντευξή του ο ελληνικής καταγωγής Ρώσος βουλευτής, πειργράφει με λεπτομέρειες το φιάσκο της επίσκεψης Παπανδρέου στην Μόσχα τουν Φεβρουάριο του 2010, όταν ο Β.Πούτιν περίμενε με το πακέτο των δισεκατομμυρίων ευρώ τον Γ.Παπανδρέου και εισέπραξε μια ... εκκωφαντική αδιαφορία, αφού ο Έλληνας πρωθυπουργός για το μόνο που του μιλούσε, κατά βάση ήταν ... οικολογικά θέματα!

Σύμφωνα με τον Ιβάν Σαββίδη η Ρωσία ήταν έτοιμη από τις αρχές του 2010 κιόλας να παράσχει δάνειο με ευνοϊκούς όρους στην Ελλάδα, πλην όμως υπήρχε ο «αστάθμητος» παράγοντας Γιώργος Παπανδρέου ο οποίος φρόντισε να «βραχυκυκλώσει» όλες τις διαδικασίες που μπορεί να οδηγούσαν στη λήψη του δανείου, στις δύσκολες εκείνες ώρες, που η Ελλάδα χρειαζόταν επειγόντως ρευστότητα.

«Ήρθε ο Παπανδρέου στη Ρωσία πέρυσι τον Φεβρουάριο, αλλά δεν καταλαβαίνω γιατί ήρθε. Ο ηγέτης της Ρωσίας ήταν έτοιμος να δώσει 25 δισ. ευρώ, δεν έχω λόγο να μην το πω δημοσίως, γιατί έχω ο ίδιος γνώση του ζητήματος. Και ήταν μάλιστα έτοιμος να τα δώσει ως πρώτη δόση βοήθειας στην Ελλάδα, όμως, δυστυχώς... Ήταν δάνειο με χαμηλό επιτόκιο, οι λεπτομέρειες δεν έχουν πια σημασία, αφού προφανώς οι Αμερικανοί, το ΔΝΤ και η Ε.Ε. είπαν όχι. Τότε γιατί ήρθε στη Μόσχα ο Παπανδρέου; Για να δει ο ελληνικός λαός ότι συναντιέται με τον Πούτιν;», δήλωσε ο Ιβάν Σαββίδης.


Έτσι τις δραματικές εκείνες ώρες όπου δηλώσεις περί «Τιτανικού» είχαν φροντίσει να τινάξουν στον αέρα την πιστοληπτική εγκυρότητα της Ελλάδας, και ο πρωθυπουργός της Ρωσίας ήταν έτοιμος να ακούσει τον Έλληνα ομόλογό του ο τελευταίος προτίμησε, σύμφωνα με τον Ι. Σαββίδη να του μιλήσει για τις οικολογικές του ανησυχίες!

«Δεν είναι μυστικό ότι εγώ κανόνισα την κατ' ιδίαν συνάντηση, ζητήθηκε η βοήθειά μου από την ελληνική πλευρά. Το πρωί συναντήθηκα με τον Παπανδρέου στην Κρατική Δούμα, μείναμε οι δυο μας με τον μεταφραστή και του είπα ότι δεν χρειάζεται να προβληματίζεται για τίποτε, ότι ο Πούτιν έχει καλή και θετική διάθεση, γι' αυτό και θα προτείνει να μείνουν μόνοι τους κι εφόσον δώσει κι αυτός τη συγκατάθεσή του, μπορεί να του θέσει οποιοδήποτε ζήτημα θεωρεί χρήσιμο. Ηταν έτοιμος να ακούσει τα πάντα» υποστήριξε ο κ. Σαββίδης, υπογραμμίζοντας ότι η συνομιλία κράτησε τελικά μόλις 20 λεπτά και λίγο αργότερα ενημερώθηκε από το Κρεμλίνο «ότι κατά τη διάρκειά της ο Παπανδρέου ουσιαστικά δεν έκανε απολύτως καμία ερώτηση, ούτε έθεσε θέμα ανάπτυξης οικονομικών ή στρατηγικών σχέσεων, αλλά μιλούσε για τα ... οικολογικά προβλήματα της Ελλάδας»!


Σύμφωνα με τον ηγέτη των ομογενών της Ρωσίας, ο Β. Πούτιν είχε νωρίτερα σε ένδειξη καλής θέλησης ορίσει ως υπεύθυνο για την υλοποίηση των διμερών συμφωνιών τον Ιγκορ Σέτσιν, «έναν από τους ισχυρότερους αντιπροέδρους της ρωσικής κυβέρνησης, ο οποίος επιβλέπει ολόκληρο το ενεργειακό σύμπλεγμα και τη βαριά βιομηχανία μηχανοκατασκευών».

Αυτό σήμαινε ότι η Ρωσία είναι έτοιμη για άμεση συμφωνία και επιτάχυνση των διαδικασιών, όμως η Ελλάδα δεν έδειξε καμία διάθεση και «το ίδιο βράδυ πήγα στο προεδρικό ξενοδοχείο "Πρέζιντεντ" όπου έμενε ο Παπανδρέου, και τον ρώτησα: Πείτε μου σας παρακαλώ, γιατί ήρθατε και γιατί χρειαζόταν η κατ' ιδίαν συνάντηση, γιατί μου ζητήσατε βοήθεια, για να με δυσφημήσετε;».

Κατά τις εκτιμήσεις του ομογενή πολιτικού, «η αντίδραση που ακολούθησε είναι πλέον προς την αντίθετη κατεύθυνση» και έτσι μπορεί να εξηγηθεί και η πρόσφατη αναβολή της προγραμματισμένης για τις 5 Ιουλίου επίσκεψης Λαμπρινίδη στη Μόσχα, έπειτα από ρωσική πρωτοβουλία και με διατύπωση πρωτοφανών αιχμών για έλλειψη περιεχομένου στις διμερείς επαφές.

Σύμφωνα με τον Ι. Σαββίδη, το Κρεμλίνο ζήτησε να εξηγηθεί στον πρωθυπουργό ότι θα μπορούσε να ζητήσει οποιαδήποτε διευκόλυνση ήθελε, έστω και τηλεφωνικά, από τον Β. Πούτιν, γι' αυτό και αργότερα προτάθηκε να χορηγηθεί δάνειο, «που θα πληρωθεί εν μέρει με κρατικές δεσμεύσεις και εν μέρει με αγροτικά προϊόντα», έτσι ώστε να υλοποιηθεί το συμβόλαιο αγοράς τεθωρακισμένων οχημάτων μεταφοράς προσωπικού από τη Ρωσία, όμως και η πρόταση αυτή απορρίφθηκε".

Πρόκειται για την διακρατική συμφωνία προμήθειας των BMP-3HEL. Βέβαια το παράδοξο θα ήταν να την προχωρήσει η κυβέρνηση Παπανδρέου. Εδώ αρνήθηκε να συζητήσει για χαμηλότοκο δάνειο 25 δισ. ευρώ θα συζητούσε να δώσει 1,2 δισ. ευρώ, έστω και αν υπήρχε κρατική δέσμευση;

Οι ελληνικές επιλογές οδηγούν, κατά τον Ι. Σαββίδη, στη σταδιακή μεγιστοποίηση των ρωσοτουρκικών σχέσεων, καθώς «στο φόντο μιας Ελλάδας που αδυνατίζει και όλο και περισσότερο αποστρέφει το πρόσωπό της από τη Ρωσία, όλο και ενεργότερα η τουρκική οικονομία συνεταιρίζεται με τη ρωσική και η Τουρκία ισχυροποιείται», εξέλιξη, που «θα είναι το χειρότερο έγκλημα για πολλές χιλιετίες. Και τότε δεν θα μπορούμε πλέον τίποτε να διορθώσουμε».

Friday, June 24, 2011

"Deutschland ist der größte Schuldensünder des 20. Jahrhunderts"


Griechenlands Pleitekarriere lässt sich nicht überbieten? Doch - von Deutschland, sagt der Wirtschaftshistoriker Albrecht Ritschl im Interview. Er warnt: Die Bundesrepublik muss sich in der Euro-Krise zügeln, sonst könnte sich die Stimmung gegen das Land drehen.


SPIEGEL ONLINE: Herr Ritschl, Deutschland tritt in der Debatte über weitere finanzielle Hilfen für Griechenland wie ein Besserwisser auf. Die Bundesregierung handelt mit ihrer Unnachgiebigkeit nach dem Motto "Geld für euch gibt es nur, wenn ihr das macht, was wir verlangen." Ist diese Haltung gerechtfertigt?

Ritschl: Nein, dafür gibt es keine Grundlage.
SPIEGEL ONLINE: Das dürften die meisten Deutschen anders sehen.

Ritschl: Das mag sein, aber Deutschland hat im 20. Jahrhundert die wohl größten Staatspleiten der jüngeren Geschichte hingelegt. Ihre heutige finanzielle Stabilität und ihren Status als Oberlehrer Europas verdankt die Bundesrepublik allein den USA, die sowohl nach dem Ersten als auch nach dem Zweiten Weltkrieg auf sehr viel Geld verzichtet haben. Das wird leider immer wieder vergessen.

SPIEGEL ONLINE: Was genau ist damals passiert?

Ritschl: Die Weimarer Republik hat von 1924 bis 1929 auf Pump gelebt und sich das Geld für ihre Reparationsleistungen des Ersten Weltkriegs von Amerika geborgt. Diese Kreditpyramide krachte in der Wirtschaftskrise 1931 zusammen. Das Geld war weg, der Schaden für die USA gigantisch, der Effekt auf die Weltwirtschaft verheerend.

SPIEGEL ONLINE: Ähnlich war es nach dem Zweiten Weltkrieg.

Ritschl: Da hat Amerika gleich dafür gesorgt, dass nicht wieder hohe Reparationsansprüche an Deutschland gestellt wurden. Bis auf wenige Ausnahmen wurden alle solchen Forderungen auf die lange Bank geschoben, bis zu einer künftigen Wiedervereinigung. Für Deutschland ist das lebenswichtig gewesen, es war die eigentliche finanzielle Grundlage für das Wirtschaftswunder. Zugleich mussten aber die Opfer der deutschen Besetzung in Europa verzichten, darunter auch die Griechen.

SPIEGEL ONLINE: In der jetzigen Krise sollte Griechenland zunächst 110 Milliarden Euro von den Euro-Staaten und dem Internationalen Währungsfonds bekommen. Jetzt soll ein weiteres Rettungspaket verabschiedet werden, das ähnliche Dimensionen haben dürfte. Es geht also um sehr viel Geld. Wie groß waren denn die deutschen Staatspleiten?

Ritschl: Gemessen jeweils an der Wirtschaftsleistung der USA war allein der deutsche Schuldenausfall in den dreißiger Jahren so bedeutsam wie die Kosten der Finanzkrise von 2008. Im Vergleich dazu ist das griechische Zahlungsproblem eigentlich unbedeutend.

SPIEGEL ONLINE: Mal angenommen, es gäbe ein globales Ranking der Pleitekönige. Auf welchem Platz würde Deutschland landen?

Ritschl: Deutschland ist Schuldenkaiser: Nach der Schadenshöhe im Vergleich zur Wirtschaftsleistung gerechnet ist Deutschland der größte Schuldensünder des 20. Jahrhunderts - wenn nicht überhaupt der jüngeren Finanzgeschichte.

SPIEGEL ONLINE: Selbst Griechenland kann nicht mit uns mithalten?

Ritschl: Nein, das Land spielt an sich eine nebensächliche Rolle. Nur die Ansteckungsgefahren auf andere Euro-Länder sind das Problem.

SPIEGEL ONLINE: Die Bundesrepublik gilt als Inbegriff der Stabilität. Wie oft war Deutschland denn insgesamt pleite?

Ritschl: Das kommt darauf an, wie man rechnet. Allein im vergangenen Jahrhundert mindestens drei Mal. Nach dem ersten Zahlungsausfall in den dreißiger Jahren wurde der Bundesrepublik 1953 von den USA ein Schuldenschnitt - im Englischen "Haircut" - verpasst, der das Schuldenproblem von einem voluminösen Afro-Look auf eine Vollglatze reduzierte. Seitdem stand Deutschland glänzend da, während sich die anderen Europäer mit den Lasten des Weltkriegs und den Folgen der der deutschen Besetzung abrackerten. Und selbst 1990 kam es noch zu einem Schuldenausfall.

SPIEGEL ONLINE: Wie bitte?

Ritschl: Ja, der damalige Kanzler Helmut Kohl weigerte sich damals, das Londoner Abkommen von 1953 umzusetzen. Darin war festgeschrieben, dass die deutschen Reparationszahlungen aus dem Zweiten Weltkrieg im Falle einer Wiedervereinigung neu geregelt werden. Man hat nur die Bedienung kleiner Restbeträge abgewickelt. Dabei ging es aber um minimale Summen. Reparationen hat Deutschland nach 1990 nicht gezahlt - von den Zwangsarbeiterentschädigungen mal abgesehen - und auch die im Zweiten Weltkrieg aus den besetzten Ländern herausgepressten Kredite und Besatzungskosten nicht getilgt. Auch gegenüber Griechenland nicht.

SPIEGEL ONLINE: Anders als 1953 in Deutschland geht es bei der aktuellen Diskussion über die Rettung Griechenlands ja weniger um einen "Haircut" als vielmehr um eine Verlängerung der Laufzeiten der Staatsanleihen, also eine "weiche Umschuldung". Kann man dann überhaupt von einer drohenden Pleite sprechen?

Ritschl: Auf jeden Fall. Selbst wenn ein Land nicht zu hundert Prozent blank ist, kann es pleite sein. Genau wie in den fünfziger Jahren im Falle Deutschlands ist es illusorisch zu glauben, die Griechen könnten ihre Schulden jemals alleine abtragen. Und wer das nicht schafft, ist eben pleite. Nun muss festgelegt werden, wie hoch die Ausfallquote der Staatsanleihen ist, auf wie viel Geld die Gläubiger des Landes also verzichten müssen. Es geht dabei vor allem darum, den Zahlmeister zu finden.

SPIEGEL ONLINE: Der größte Zahlmeister dürfte Deutschland sein.

Ritschl: Darauf läuft es wohl hinaus, aber wir waren auch reichlich sorglos - und unsere Exportindustrie hat von den Aufträgen gut gelebt. Die Anti-Griechenland-Stimmung, die in vielen deutschen Medien verbreitet wird, ist hochgefährlich. Und wir sitzen im Glashaus: Nur durch den weitgehenden Schulden- und Reparationsverzicht seiner Kriegsopfer aus dem Zweiten Weltkrieg ist Deutschlands Wiederaufstieg möglich geworden.

SPIEGEL ONLINE: Deutschland sollte sich also mehr zurückhalten?

Ritschl: Deutschland hat im 20. Jahrhundert zwei Weltkriege begonnen, den zweiten davon als Vernichtungs- und Ausrottungskrieg geführt - und anschließend haben die Feinde die Reparationszahlungen ganz oder in beträchtlichem Umfang erlassen. Dass die Bundesrepublik ihre wirtschaftliche Blüte der Gnade anderer Völker verdankt, hat auch in Griechenland niemand vergessen.

SPIEGEL ONLINE: Wie meinen Sie das?
Ritschl: Die Griechen kennen die feindlichen Artikel aus deutschen Medien sehr gut. Wenn die Stimmung im Land umschlägt, alte Forderungen nach Reparationszahlungen laut und auch von anderen europäischen Staaten erhoben werden und Deutschland diese je einlösen muss, werden wir alle bis aufs Hemd ausgezogen. Da könnten wir im Vergleich dankbar sein, Griechenland auf unsere Kosten luxuszusanieren. Wenn wir hier der Stimmungsmache folgen und den dicken Emil geben, der die Zigarre pafft und nicht zahlen will, dann werden irgendwann die alten Rechnungen wieder präsentiert.
SPIEGEL ONLINE: Wenigstens zum Schluss noch ein paar versöhnliche Töne: Wenn Sie eine Lehre aus der Geschichte ziehen, welche Lösung wäre derzeit die beste für Griechenland - und Deutschland?

Ritschl: Die Pleiten Deutschlands im vergangenen Jahrhundert zeigen: Das Vernünftigste ist, jetzt einen echten Schuldenschnitt zu machen. Wer Griechenland Geld geliehen hat, müsste dann auf einen beträchtlichen Teil seiner Forderungen verzichten. Das würden einige Banken nicht verkraften, also müsste es neue Hilfsprogramme geben. Für Deutschland könnte das teuer werden, aber zahlen müssen wir so oder so. Und immerhin hätte Griechenland dann die Chance auf einen Neuanfang.

Das Interview führte Yasmin El-Sharif

Friday, May 27, 2011

Supercomputing in F1 – Unlocking the Power of CFD

The highly sophisticated body shape of a modern Formula One (F1) car is dictated by
aerodynamic efficiency and performance. With numerous deflectors and external devices
added, the coupling and interaction between the front-end and rear-end of the car have become strong. Minute changes in geometrical details or car set-up can have a significant impact on car performance and, therefore, can result in success or failure. Such detail optimisation is accomplished in wind tunnels which increasing numbers of competitors in F1 runs 24 hours a day to discover that last fraction of performance gain. This level of finetuning is beyond the current CFD capabilities.
Still, though, this design evolution process through physical testing is somewhat of a heuristic method. The fundamental understanding and knowledge of the underlying physical mechanisms are not necessarily gained. The complexity and nature of F1 aerodynamics can only be fully understood through advanced and highly accurate CFD simulations.

With ever increasing simulation capacities, new horizons are opening up. New investments in computer hardware and CFD technology allow SAUBER PETRONAS to further explore and uncover even some of the most subtle flow phenomena responsible for fundamental changes in car behaviour, handling, and performance.

In recent years the automotive industry has experienced significant changes in the
development process for new vehicles in order to have:
a) Improved product performance and quality.
b) Reduced development costs.
c) Reduced lead-times and “time-to-market”.
The traditional Vehicle Development Process (VDP) has been replaced with a modern
approach that relies more on computational tools and simulations. In the early 90’s the automotive industry was running on an average 60 month VDP’s. Today, most major
automotive manufacturers are working to a VDP of 18 months or less (fast VDP). This
resulted from considerable effort that has been devoted to the development of computational methods, providing guidance in the design of various components of modern cars. The introduction of unstructured grid technology, accurate and robust numerical methods, and the availability of powerful parallel computers has acted as catalysts in the rapid acceptance of these approaches.


Computational Fluid Dynamics (CFD) is now becoming a cornerstone in vehicle development and is extensively used throughout the complete process, from early concept phase to detailed analysis of a final product. Within the F1 industry, development lead-times have to be kept even shorter. In F1, not only a brand new race car is born before the start of every season, but intense development of the race car also continues throughout the season for every race, which takes place only two to three weeks apart. Hence, the importance of an efficient and fast development process becomes evident to keep up with such a demanding pace.

Tuesday, May 3, 2011

Smyrna 1922, Holocaytom

An unknown video, historical document the destruction of Smyrna in 1922, which was taken by George Magarian, saw the limelight by his grandson Robert Davidian, who discovered in his grandmother's house in New York, I.P . D, where it was forgotten for decades.

In this rare video documentary we get to see pictures of happy Izmir before the disaster, images of the burned land left behind by the ferocity of the Turks, and many others from the flight of fugitive, camps and effort survival in new homes. Towards the end even the 10-minute video can see the first homes built by refugees in Athens, probably in the New World.

The Robert Davidian, director, cameraman and producer of emissions, able to convert to digital and to salvage damaged before the video-documentary, which had attracted his grandfather in 35 mm film. Then upload to the Internet for free use, wanting to share with us all the historical moments of the destruction of Smyrna by the Turks, recorded by George Magarian.

The George Magarian was born in 1895 and studied at the American College of Konya in Asia Minor and later served as director of the Christian Organization YMCA Iconium. The video based on footage he took before and immediately after the destruction of Smyrna in 1922, and contained several shots from the refugee camps and the valuable assistance of Christian Organizations YMCA & YWCA (YMCA & IDUs) who provided them to find their feet .

The video begins with scenes of the happy period of Izmir before the disaster on the waterfront (where visible and the famous horse-drawn trams Smyrna moving), the French Quarter and the purchase of Izmir. Then there are shots of the burned city left behind by the ferocity of the Turks to come where we can see smoke from the embers. Boats filled with convoys of refugees sail for new homes (to Mytilene, Chios and other Greek islands and to Thessaloniki and Athens). Footage from Athens (in front of the Greek parliament today) and from Thessaloniki, where refugees have gathered tens of thousands seeking refuge. The mental anguish for the loss of loved ones is the only distraction of refugees from hunger. Refugee camps where the YMCA & YWCA distribute bread, milk, soup and clothing. Moving image of a lady, which shows the camera a newborn baby only 2 days which was abandoned on the steps in front of a church, but the images of refugees gathered around the tables posted information offices to seek their loved ones. The information broadcast by the YMCA & YWCA contributed to many cases of family reunification. Two ladies of the American YWCA distinguished record refugees.

http://www.youtube.com/watch?v=t2B84CyLblk&feature=player_detailpage



Only 5% of refugees are healthy males, all others are old men, women and children who can not sustain themselves. Here are shots of destitute refugee children playing games and crowds waiting for medical examination. Towards the end of the video, about 8.30 minutes, divided the first homes built by refugees in Athens with bricks made of mud, makeshift camps, barracks, etc..